High pression cemented carbide strip from Chengdu Santon
Main products:
Turning insert, milling insert, threading insert, grooving insert, aluminum insert, carbide endmill,etc. Such as:CNMM,CNMG,CCMW,CCMT,DNMA,DNMG,DCMW,DCMT,VNMG,VBMT,WNMG,WXMT,WCMT,SPUN,SNMA,SNMM,SCMT,LNMG,RNMA,RNMM,RNMG,RPMW,RPMT,KNUX,APKT,TNMA,TNMM,TNMG,TCMT,TPMT,etc.
Advantages:
1.Made from 100% virgin raw material.
2.produced with advanced equipments and perfect workmanship.
3.All products go through in-process and final inspection..
4.Stable and best production ability.
5.Best quality along with reasonable price.
Grade&Application:
SantonGrade | ISO Grade | ANSI Grade | Physical and Chemical Property | Performance & Applications | ||
Density | TRS | Hardness | ||||
g/cm3 | n/mm2 | HRA | ||||
YT15 | P10 | C7 | 11.3 | 1650 | 92.0 | Higher wear resistance with a certain impact toughness, Suitable for semi-finishing of medium chip sections, or finishing of small chip sections of steel, cast steel, alloy steel. |
YT14 | P20 | C6 | 11.4 | 1750 | 91.5 | High strength, good impact and shock resistance. Suitable for rough turning, finish milling of carbon steel, and alloy steel during continuous cutting, and semi-finishing and finishing turning during interrupted cutting . |
YT5 | P30 | C5 | 12.9 | 2200 | 90.5 | Best strength, high impact and shock resistance among W-Co-Ti alloys, but comparatively lower wear resistance. Suitable for rough turning, rough planning, and semi-finish planning of carbon steel, and alloy steel including forgings, stamped parts, and cast iron surfaces during intermittent cutting. |
YW1 | M10 | _ | 13.0 | 1710 | 92.5 | Better red hardness, resistant to impact load. A good grade for general purposes. Suitable for machining of ordinary steel, cast irons as well as steels hard to be machined such as refractory steel, high manganese steel, and stainless steel, etc. |
YW2 | M20 | _ | 12.9 | 1880 | 91.0 | Higher wear resistance and strength, resistant to high impact load. Suitable for roughing and semi-finishing of ordinary steel, and cast irons as well as refractory steel, high manganese steel, and high-grade alloy steel, etc |
YG6X | K15 | C3 | 14.9 | 1890 | 91.5 | Fine grain WC alloy, wear resistance higher than YG6, strength close to YG6. Suitable for machining chilled alloy cast irons, and refractory alloy steel, as well as finishing of ordinary cast irons. |
Chengdu Santon Cemented Carbide Co., Ltd.
- Phone: +86 028-85739522
- Business Type: Manufacturer
- Location: China
- Main Products: mining insert
- Total Employees:Less than 100 people
- Year Established:
- Export Markets:
- Total Annual Revenue:
