high quality widia hardmetal inserts for crankshafts
Product Description
A complete line of cemented carbide turning tool cutting insert can be tailor made by Santon in various grades to suit your specific applications.
Advantages
1.Made from 100% virgin raw material.
2.produced with advanced equipments and perfect workmanship.
3.All products go through in-process and final inspection.
4.Stable and best production ability.
Application
Grade information
| Santon Grade | ISO Grade | ANSI Grade | Physical and Chemical Property | Performance & Applications | ||
| Density | TRS | Hardness | ||||
| g/cm3 | n/mm2 | HRA | ||||
| ST2030 | P20~P30 | C6 C5 | 12.6 | 1950 | 91.5 | A reasonable match of wear resistance and toughness, versatile grade. Suitable for rough turning, milling, planning, and deep-drilling of carbon steel, cast steel, manganese steel, high-tensile steel, and various alloy steel. A ideal material for deep-drilling guide block. |
| YT15 | P10 | C7 | 11.3 | 1650 | 92 | Higher wear resistance with a certain impact toughness, Suitable for semi-finishing of medium chip sections, or finishing of small chip sections of steel, cast steel, alloy steel. |
| YT14 | P20 | C6 | 11.4 | 1750 | 91.5 | High strength, good impact and shock resistance. Suitable for rough turning, finish milling of carbon steel, and alloy steel during continuous cutting, and semi-finishing and finishing turning during interrupted cutting . |
| YT5 | P30 | C5 | 12.9 | 2200 | 90.5 | Best strength, high impact and shock resistance among W-Co-Ti alloys, but comparatively lower wear resistance. Suitable for rough turning, rough planning, and semi-finish planning of carbon steel, and alloy steel including forgings, stamped parts, and cast iron surfaces during intermittent cutting. |
| YW2 | M20 | _ | 12.9 | 1880 | 91 | Higher wear resistance and strength, resistant to high impact load. Suitable for roughing and semi-finishing of ordinary steel, and cast irons as well as refractory steel, high manganese steel, and high-grade alloy steel, etc |
| YG6X | K15 | C3 | 14.9 | 1890 | 91.5 | Fine grain WC alloy, wear resistance higher than YG6, strength close to YG6. Suitable for machining chilled alloy cast irons, and refractory alloy steel, as well as finishing of ordinary cast irons. |
| YG6 | K20 | C2 | 14.9 | 2050 | 90.5 | High wear resistance, better impact and shock resistance. Suitable for semi-finishing, and finishing of cast irons, non-ferrous metal, alloys, and non-metallic materials at moderate cutting speed. |
| YG8 | K30 | C1 | 14.7 | 2520 | 90 | High strength, better impact and shock resistance, but lower wear resistance and cutting speed. Suitable for roughing of cast irons, non-ferrous metal, alloys, and non-metallic materials at low speed. |
Chengdu Santon Cemented Carbide Co., Ltd.
- Phone: +86 028-85739522
- Business Type: Manufacturer
- Location: China
- Main Products: mining insert
- Total Employees:Less than 100 people
- Year Established:
- Export Markets:
- Total Annual Revenue:
